Roborock Qrevo Edge 2 – 25,000 Pa HyperForceSuction & Dual Anti-Tangle System

Roborock Qrevo Edge 2 Robot Vacuum

Overview

The Roborock Qrevo Edge 2 is the Qrevo family’s precision cleaner: 25,000 Pa of HyperForce suction in a 3.14 inch ultra-slim body that gets under toe-kicks, sofas, and beds, with a FlexiArm arc side brush and extending mop that reach 0 distance into edges and corners. The Dual Anti-Tangle System – a liftable DuoDivide main brush plus the FlexiArm side brush – captures hair up to 15.75 inches long at a 0 percent tangling rate.

Reactive AI obstacle recognition identifies more than 280 object types, down to items just 1.18 inches wide, using structured light and an RGB camera, while a retractable laser navigation module, 100 degree vision module, and dToF sensor let the slim body work confidently in low, dark spaces. DirTect technology tells dry messes from wet ones and adjusts the clean, and the dock washes mops with 80 C (176 F) hot water, dries them with 55 C warm air, cleans itself with hot water, and auto-empties the dust bin for up to 65 days.

Pick the Edge 2 if your cleaning problems live at the margins of the room – baseboards, corners, under-cabinet gaps – and you want flagship-grade suction and a fully self-maintaining dock while you are at it.

Specifications

Key Features

• 25,000 Pa HyperForce Suction: The strongest suction in the Qrevo Edge line pulls embedded grit from carpet and fine dust from floor seams in a single pass.
• Corner and Edge Precision: The FlexiArm arc side brush and extending mop reach 0 distance along baseboards and into corners, and toe-kick detection cleans recesses with as little as 0.98 in of clearance.
• Dual Anti-Tangle System: The liftable DuoDivide main brush and FlexiArm side brush capture hair up to 15.75 in long with a 0 percent tangling rate – built for multi-pet households.
• 3.14 Inch Ultra-Slim Design: A retractable laser module, 100 degree vision module, and dToF sensor let the Edge 2 navigate under sofas, beds, and cabinets where standard robots cannot fit.
• Reactive AI Obstacle Recognition: Recognizes 280+ object types – down to 1.18 in items – with structured light and an RGB camera, in daylight or darkness.
• DirTect Smart Mess Handling: Distinguishes wet from dry messes, targets stains, lifts the mop and brush when needed, and automatically re-cleans spots it missed.
• Self-Maintaining Dock: 80 C hot-water mop washing with re-wash on detected dirt, 55 C warm-air drying, hot water dock self-cleaning, warm water auto-refill, a soaking mode, and up to 65 days of auto dust emptying.
• Smart Home Ready: Hello Rocky built-in voice assistant, major third-party voice assistant support, and Matter integration.

Applications

The Edge 2 earns its keep in homes with lots of edges and low clearances: kitchens with toe-kick recesses, rooms ringed with baseboards and furniture legs, platform beds and low sofas, and any layout where dust collects exactly where round robots cannot reach. Multi-pet households benefit twice – from the 15.75 inch hair handling of the anti-tangle system and from pet recognition that pauses cleaning around animals and snaps photos along the way. Mixed carpet and hard floors are handled with brush and mop lifting plus 25,000 Pa of suction.

Within the Roborock lineup, the Edge 2 succeeds the original Roborock Qrevo Edge with more suction and a slimmer body; if roller-mop floor washing matters more than edge precision, look at the Roborock Qrevo Curv 2 Flow, and for the flagship tier see the Roborock Saros 10R.

Setup and Getting Started

1. Unbox and remove protectors: Remove all protective films and foam from the robot, mop modules, and dock, and confirm the dust bag is seated.
2. Place the dock: Set the multifunctional dock on its base against a wall on a hard, level surface near an outlet, with open clearance on both sides and in front per the quick start guide; use the included ramp if the dock sits on a slight step.
3. Attach mops and fill water: Click in the rotating mop modules and fill the clean water tank.
4. Charge: Dock the robot and let it charge fully before the first cleaning run.
5. Pair in the Roborock app: Download the Roborock app and follow the pairing prompts to connect the robot to your home Wi-Fi.
6. Run the first mapping cycle: Let the robot map your floors, review rooms, then set schedules, no-go zones, and no-mop zones – and let SmartPlan 3.0 and RockMind take over the routine decisions.

What’s Included

• Roborock Qrevo Edge 2 Robot (x1)
• Multifunctional Dock with Base (x1)
• Rotating Mop Module Set (x1)
• Power Cable (x1)
• Ramp (x1)
• User Manual (x1)

Documentation and Resources

• Support Center: Roborock Support Center
• App Download: Roborock App
• Warranty Terms: Roborock Service and Warranty

Warranty Information

The Roborock Qrevo Edge 2 is covered by Roborock’s 1-year manufacturer warranty for new products, running from the purchase date and covering defects in materials and workmanship. Warranty service and technical support run through Roborock’s official US channels – the Roborock Support Center, [email protected], and the 24/7 US support line.

Not Covered

• Normal wear and tear and cosmetic damage such as scratches, dents, and broken plastic
• Damage from misuse, accidents, neglect, unusual stress, or unauthorized repairs and modifications
• Damage caused by accessories not manufactured or approved by Roborock
• Use in commercial or non-residential settings

Warranty service requires proof of purchase – a receipt or comparable sales document showing the purchase date. Without it, coverage defaults to three months from the product’s factory shipping date.