Poolguard GAPT-2 Pool Gate Alarm – UL 2017 Water Hazard Entrance Alarm
The Poolguard GAPT-2 is an outdoor-rated gate/door alarm designed to help alert you when a pool gate (or exterior door) leading to the pool area is opened. It uses a sensor switch and magnet to monitor the gate and sounds an audible alarm if the gate is opened without using the adult pass-through feature.
Key Features
- Part Number: GAPT-2
- Compliance: Meets UL 2017 (water hazard entrance alarm equipment)
- Alarm Output: 85 dB at 10 feet
- Power: 1x 9V alkaline battery (not included)
- Low Battery Alert: Audible chirp when battery is low
- Automatic Reset: Resets automatically under normal use conditions
- Adult Pass-Through: Built-in pass-through switch for adult entry/exit
- Outdoor Rated: Designed for outdoor gate installations
How the Alarm Works
- Standard operation: When the gate opens, the alarm gives a brief window to press the pass-through switch.If not pressed in time, the alarm will sound (even if the gate is closed again).
- Adult pass-through: Pressing the pass-through switch shortly after opening the gate provides a short delay to pass throughand close the gate before the alarm sounds.
- Reminder if left open: If the gate is left open, the alarm continues to alert until the gate is closed and the pass-throughswitch is pressed to silence.
Installation Notes
- Mounting height: Install the alarm at least 54 inches above the gate threshold.
- Sensor alignment: The sensor switch mounts to the fixed post/frame and the magnet mounts to the gate so they line up when closed.
- Acceptable gap: Typical spacing between the sensor and magnet is up to about 2 inches (metal gates/posts may require a smaller gap).
- Wiring: Includes sensor wiring for typical gate installations (mounting hardware varies by setup).
Battery & Operation
- Uses a standard 9V alkaline battery (not included).
- Battery life is commonly about 1 year under typical use (varies with alarms and climate).
- Test the alarm regularly by opening the gate and confirming the alarm sounds as expected.
Safety Note
- This is a safety alarm system and is not a life-saving device. Always supervise children and use layered pool safety measures.
Related Products
- Search: Poolguard GAPT-2
- Search: Pool Gate Alarms
- Search: Pool Alarms
- Search: 9V Batteries
- Search: Pool Safety Products
Installation & Maintenance Tips
- Replace the 9V battery at the start of each swim season (or sooner if you hear low-battery chirps).
- Keep the sensor and magnet clean and firmly mounted—loose hardware can cause missed triggers.
- Confirm the gate self-closes and latches correctly; a gate left ajar defeats the purpose of a monitored entry point.
- After storms or windy conditions, re-check alignment and mounting screws for movement.
