Pentair 2-Inch PVC Slide Valve O-Ring Kit
Rebuild Pentair 2-inch PVC slide valves 261047 and 261165 with a complete OEM O-ring kit. Restore sealing and smooth backwash operation.
Features
- Confirmed fit for Pentair 2-inch PVC slide valve models 261047 and 261165.
- Includes two 273090 O-rings, one JV18 O-ring and one 273062 O-ring.
- Replaces the primary valve seals during a complete O-ring service.
- Helps correct water leaks and stiff push-pull operation caused by worn seals.
- O-ring kit only; valve, piston assembly and handle are not included.
Restore reliable sealing without replacing the complete backwash valve. This genuine Pentair O-ring kit contains the primary seals used in compatible 2-inch PVC slide valve assemblies.
Replace all included O-rings during the same service for even sealing. Before reassembly, inspect the piston rod, valve body and seal grooves for scratches, cracks or mineral buildup that could prevent the new seals from seating correctly.
Installation Suggestion
- Turn off the circulation pump and completely relieve filter pressure.
- Disassemble the slide valve according to the valve service instructions.
- Remove the old seals and clean each O-ring groove without scratching it.
- Apply a thin coating of pool-safe silicone lubricant, install the new seals and reassemble the valve.
Pro Tip
Do not install new O-rings over a scratched or bent piston rod. Replace a damaged piston assembly before reassembling the valve, then test for leaks at normal operating pressure.
