Product Description
The ROBERT BOSCH TOOL GROUP DLSB1007 is a 5/8-inch diameter spade bit from the Daredevil line, designed for fast, accurate wood boring in demanding trade applications. At 16 inches in total length with a 15-inch drilling depth, it reaches deep into wall cavities and floor joists where standard bits fall short. The full cone threaded tip pulls the bit into the material for effortless entry, while the 1/4-inch hex shank with power groove locks securely into impact drivers and drills to reduce slippage under load. Electricians, plumbers, and general contractors rely on this bit for running conduit, pipe, and cable through framing.
This spade bit is built for drilling through dimensional lumber, engineered wood, and similar materials in residential and light commercial framing and rough-in work. The contoured paddle design accelerates chip removal to keep the bit cutting cleanly at depth. Spur and reamer tips score the perimeter of the hole before the paddle clears the waste, producing cleaner entry and exit holes. The 5-pack quantity suits job-site use where multiple holes per run are the norm. It fits any 1/4-inch hex chuck or quick-change bit holder.
Key Features
- Full cone threaded tip pulls bit into material for fast, low-effort entry
- Contoured paddle promotes rapid chip evacuation during deep drilling
- Spur and reamer tips score hole perimeter for cleaner cuts
- 1/4-inch hex shank with power groove reduces slippage in driver chucks
- 16-inch overall length with 15-inch usable drilling depth for deep cavity access
- Sold in a 5-pack for high-volume rough-in work
Compatibility
Designed for use with any 1/4-inch hex chuck drill driver or quick-change system. Suitable for boring through dimensional lumber and engineered wood framing in residential and light commercial construction.
Installation Notes
Installation of this bit is performed by electricians, plumbers, and general contractors during rough-in framing work. Ensure the drill or driver chuck is fully seated on the hex shank before operation. Confirm no electrical wiring, pipes, or other utilities are present in the drilling path before boring. Operate at appropriate drill speeds for the material to maximize bit life and hole quality.
Technical Specifications
- Bit Diameter: 5/8 inches
- Overall Length: 16 inches
- Drilling Depth: 15 inches
- Shank Type: 1/4 inch hex
- Package Quantity: 5
- Weight: 1.45 pounds
Standard Information
- Brand: ROBERT BOSCH TOOL GROUP
- Manufacturer Part Number: DLSB1007
