TheScaleStick SS-10 w/HydroBlendFilter Systemprevents limescale build-up while providing corrosion protection for water fed equipment including coffee and espresso machines, dishwashers, tankless water heaters, ice machines, reverse osmosis systems, distillers, misting systems, instant-hot water dispensers. This product includes all required parts to operate, serving as the one-stop solution to purifyyour water!
Features:
- HydroBlend.The SS-10 features the Hydroblend compound, which is a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow water-fed equipment. HydroBlend is unaffected by high temperatures unlike standard scale control additives like polyphosphates. The SS-10’s patented design dispenses a controlled amount of HydroBlend for long-term protection and greater effectiveness of other standard treatments.
- Operation Recommendations.Pre-existing scale in your equipment is possible which may come loose and clog the equipment. Please remove any loose scale before installing the ScaleStck SS-10. Deliming your equipment prior to use is recommended, but it is not required. It is best practice to inspect the ScaleStick cartridge every 6 months. The SS-10 should be replaced before the HydroBlend is completely dissolved.
- NSF Certified.This filter has been certified by NSF International to meet NSF/ANSI Standard 42 for material requirements only.
The Anti-Scale Filtration System Includes:
- 1 10″ Scale Stick
- 1NP 10 Standard Housing w/PR 3/4 FPT Blk / Clear
- 1 Mounting Bracket for STD housings
- 2 Male adapters 3/4 CTS x 3/4 NPT
- 1 Housing Wrench
- 4 Screws to mount cap on the bracket
- Teflon Tape
Installation Precautions:
-
Install on cold water line only. Maximum temperature for the housing and ScaleStick is 100F
-
Do not install where the unit could freeze
-
Maximum pressure is 90 psi
- Scale Stick is good for flow rates up to 6 gpm
