VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just ove4.5” fothe 10” models and just ove5” fothe 12” models, allowing them to fit into a wide variety of installation applications.
600W POWER HANDLING
The 10” and 12” S-Series subwoofers are engineered with an improved voice coil allowing the woofeto benefit from an increased powerating of 600 watts. Match them with the powerful VPoweMRV-M500 mono amplifiefoa great subwoofesystem.
CUSTOM-STAMPED STEEL FRAME
Each S-Series subwoofeuses a custom-stamped steel frame. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents as well as a vented back plate to help cool the subwoofevoice coil and motoparts, plus a shallow design to help fit in smallespaces.
PUSH-TYPE INSERT TERMINALS WITH DUAL VOICE COIL JUMPER SYSTEM
The push-type insert terminals help reduce the installation time of the S-Series subwoofers. Just strip the speakeinsulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal.
STRONTIUM FERRITE DOUBLE-STACKED MAGNETS
The S-Series subwoofers use two strontium ferrite magnets stacked together, foincreased motostrength and excursion which ultimately leads to more bass output.
CLEAN, CONCEALED MOUNT GASKET SYSTEM
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished appearance foany vehicle.
OPTIONAL GRILLES
All S-Series subwoofers are compatible with optional grilles (sold separately) to provide added protection to the cone. The grilles feature a mesh design with a S-Series logo badge. Choose from the following to match the size of yousubwoofer; all grilles are sold as single pieces.KTE-8G: Fo8” S-Series SubwoofersKTE-10G.2: Fo10” S-Series SubwoofersKTE-12G.2: Fo12” S-Series Subwoofers
|
|
Size |
10-inch |
|
Voice Coil |
DVC |
|
Impedance |
2 ohms |
|
RMS PoweRating (Watts) |
600 |
|
Peak PoweRating (Watts) |
1800 |
| Cone Material |
Kevlar-Reinforced Pulp |
| Surround Material |
Rubber |
| Free Air |
No |
| Sensitivity |
85 dB at 1 Watt |
| Frequency Response |
26-200hz |
|
Top Mount Depth (Inches) |
4 3/4 |
| Bottom Mount Depth (Inches) |
5 1/2 |
| Cutout Diamete(Inches) |
8 15/16 |
| Vas (liters) |
24.3 |
| Fs (Hz) |
33 |
| Xmax (millimeters) |
15 |
| Warranty | 1 Year |








